Gilly’s Floor Polish Clear/Dark 250ML, 1L, 4L

Description

Floor Polish is a beeswax-based polish, designed to nourish dry timber floors and buff to a soft, natural sheen. It is perfect for raw timber floorboards.

Application

To prepare the surface, make sure the timber is well-sanded and smooth. Use a sanding sealer before waxing to reduce the amount of wax needed.

To apply, dip a soft, lint-free cloth into the tin and scrape out a small amount. Rub into the timber with pressure in line with the grain. Buff back any excess with a soft, lint-free cloth or buffing pads. Use up to three coats, particularly if the timber is very porous, buffing well between coats. Allow up to an hour between coats to let the wax sink in.

If using an electric polisher, spread a small amount of wax directly onto the brushes and spread it over the floor with the polisher. Buff back using buffing pads or soft brush fittings.

The polish dries in a minimum of 30 minutes. Make sure the surface is touch dry with no fingerprinting before applying the next coat. Apply a new coat depending on wear, as the surface becomes dull or dry.

Maintain your timber floors with this soft, nourishing beeswax polish.

Clean Up with warm, soapy water or d-Limonene or mineral turpentine for excess wax on timber.

Safety

• Keep out of reach of children
• Contains mineral solvent
• Hang out rags to dry, or soak in water. Don’t leave
  scrunched up
• May contain traces of bee pollen & soy

Ingredients: Beeswax, microcrystalline wax, carnauba wax, plant oil, low-odour, mineral solvent

Download MSDS