Gilly’s Pure Tung Oil

Description

Tung oil is a natural, slightly cloudy or transparent liquid extracted from the seeds of the tung tree. It’s widely used in the production of alkyd resin, raw lacquer, varnish, and paint, and is an ideal treatment for timber where water repellency is required.

Application

Before applying tung oil, make sure the surface is clean and dry. You can use Gilly’s Citrus Thin (d-limonene, a natural citrus solvent) or turpentine for a vigorous clean, or an all-purpose cleaner for a lighter clean. Any oil, wax, grease, or dirt residue may affect the tung oil’s ability to cure, so a thorough clean is important.

To apply on Raw Timber, mix the tung oil with Gilly’s Citrus Thin (d-limonene, a natural citrus solvent) at a 50/50 ratio. Rub or brush the oil into the timber, using lighter coats. Let the oil sit for 5 minutes. Wipe on more oil to areas that become dull as the oil soaks in. Wipe off the excess oil, then lightly sand back while still damp, using 320 grit or finer. Apply 3 coats, repeating the same procedure, with a 24-hour wait time between coats. Apply more coats if desired or necessary. Hang out any rags or soak in water.

Tung oil takes 24 hours to dry between coats and can take up to 4 weeks to completely cure. Light usage is fine during this time frame.

For general maintenance and wear, reapply 1-2 light coats of tung oil every 6-12 months to keep your timber looking fresh.

Clean Up with D-Limonene or mineral turpentine. Warm, soapy water for hand washing.

Safety

• Do not eat, drink or smoke around product. Wash hands after use.
• Hang out rags to dry, or soak in water. Don’t leave
  scrunched up.

Ingredients: Tung oil 100%

Download MSDS